 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Z00607 Standard 0.8 A Triacs Main Features Symbol IT(RMS) VDRM/VRRM IGT (Q1) Value 0.8 600 5 Unit G A2 A A1 V mA A2 G A2 A1 Description A1 A2 G The Z00607 is suitable for low power AC switching applications. Typical applications include home appliances (electrovalve, pump, door lock, small lamp control), fan speed controllers,... Thanks to the low gate triggering current these triacs can be driven directly by microcontrollers. TO-92 Z00607MA SOT-223 Z00607MN Order Codes Part Number Z00607MA 1BA2 Z00607MA 2BL2 Z00607MA 5BL2 Z00607MN 5AA4 Marking Z0607MA Z0607MA Z0607MA Z6M Table 1. Symbol IT(RMS) Absolute maximum ratings Parameter RMS on-state current (full sine wave) Non repetitive surge peak on-state current (full cycle, Tj initial = 25 C) It Value for fusing Critical rate of rise of on-state current IG = 2 x IGT , tr 100 ns Peak gate current Average gate power dissipation Storage junction temperature range Operating junction temperature range SOT-223 TO-92 F = 50 Hz F = 60 Hz tp = 10 ms F = 120 Hz tp = 20 s Tj = 110 C Tj = 110 C Tj = 110 C Ttab = 85 C TL = 50 C t = 20 ms t = 16.7 ms 9 A 9.5 0.45 20 1 0.1 - 40 to + 150 - 40 to + 110 A s A/s A W C Value 0.8 Unit A ITSM It dI/dt IGM PG(AV) Tstg Tj April 2007 Rev 8 1/7 www.st.com 7 Characteristcs Z00607 1 Characteristcs Table 2. Symbol IGT (1) VGT VGD IH (2) IL dV/dt (2) (dV/dt)c (2) Electrical characteristics (Tj = 25 C, unless otherwise specified) Test Conditions Quadrant I - II - III VD = 12 V RL = 30 MAX IV ALL VD = VDRM RL = 3.3 k Tj = 110 C IT = 200 mA I - III - IV IG = 1.2 IGT VD = 67% VDRM gate open Tj = 110 C (dV/dt)c = 0.35 A/ms Tj = 110 C MAX II MIN MIN 20 10 1.5 V/s V/s ALL MAX MIN MX. 7 1.3 0.2 5 10 mA V V mA Value 5 mA Unit 1. minimum IGT is guaranteed at 5% of IGT max. 2. for both polarities of A2 referenced to A1. Table 3. Symbol VTM(1) Vto (1) Rd (1) Static characteristics Test Conditions ITM = 1.1 A tp = 380 s Tj = 25 C Tj = 110 C Tj = 110 C Tj = 25 C Tj = 110 C MAX. MAX. MAX. MAX. 0.1 mA Value 1.5 0.95 420 5 Unit V V m A Threshold voltage Dynamic resistance VDRM = VRRM = 600 V IDRM IRRM 1. for both polarities of A2 referenced to A1. Table 4. Symbol Rth(j-t) Rth(j-I) Rth(j-a) 1. Thermal resistances Parameter Junction to tab (AC) Junction to lead (AC) Junction to ambient TO-92 150 SOT-223 TO-92 S(1) = 5 cm SOT-223 Value 25 C/W 60 60 C/W Unit S = Copper surface under tab. 2/7 Z00607 Characteristcs Figure 1. Maximum power dissipation versus RMS on-state current (full cycle) Figure 2. Relative variation of gate trigger current, holding current and latching current versus junction temperature (typical values) P(W) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 IGT, IH, IL [Tj] / IGT, IH, IL [Tj=25C] 2.5 2.0 IGT 1.5 IH & IL 1.0 0.5 IT(RMS)(A) 0.0 -40 -20 0 20 Tj (C) 40 60 80 100 120 Figure 3. Surge peak on-state current versus Figure 4. number of cycles Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10 ms and corresponding value of I2t ITSM (A) 10 9 8 7 6 5 4 3 2 1 0 1 Repetitive Tamb = 25C Non repetitive Tj initial = 25C t=20ms ITSM (A), I2t (A2s) 200.0 100.0 One cycle Tj initial = 25C dI/dt limitation: 20A/s ITSM 10.0 1.0 I2t Number of cycles 10 100 1000 tp (ms) 0.1 0.01 0.10 1.00 10.00 Figure 5. On-state characteristics (maximum values) Figure 6. Relative variation of critical rate of decrease of main current versus (dV/dt)c (typical values) ITM(A) 10.0 10.0 (dI/dt)c [(dV/dt)c] / Specified (dI/dt)c 8.0 Tj = Tjmax. 6.0 1.0 4.0 Tj = 25C Tj=max. Vt0=0.95 V Rd=420 m 2.0 VTM (V) 0.1 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 0.0 0.1 (dV/dt)c (V/s) 1.0 10.0 3/7 Ordering information scheme Z00607 Figure 7. Relative variation of critical rate of decrease of main current versus junction temperature Figure 8. SOT-223 Thermal resistance junction to ambient versus copper surface under tab (printed circuit board FR4, copper thickness: 35 m) (dI/dt)c [Tj] / (dI/dt)c [Tj Specified] 6 5 4 3 2 1 0 0 10 20 30 40 Rth(j-a)(C/W) 130 120 110 100 90 80 70 60 50 40 30 20 10 0 70 80 90 100 110 Tj (C) 50 60 S(cm) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 2 Ordering information scheme Z 006 07 M A Triac series Current 006 = 0.8A Sensitivity 07 = 5mA Voltage M = 600V Package A = TO-92 N = SOT-223 Packing mode 1BA2 = TO-92 Bulk 2BL2 = TO-92 Ammopack 5BL2 = TO-92 Tape and reel 5AA4 = SOT-223 Tape and reel Blank 1BA2 4/7 Z00607 Packaging information 3 Packaging information Table 5. SOT-223 Dimensions Dimensions Ref. A A1 e1 B V c Millimeters Min. Typ. Max. 1.80 0.02 0.60 2.90 0.24 6.30 0.70 3.00 0.26 6.50 2.3 4.6 3.30 6.70 3.50 7.00 3.70 7.30 0.10 0.85 3.15 0.35 6.70 Min. Inches Typ. Max. 0.071 0.001 0.004 0.024 0.027 0.033 0.114 0.118 0.124 0.009 0.010 0.014 0.248 0.256 0.264 0.090 0.181 0.130 0.138 0.146 0.264 0.276 0.287 A A1 B B1 c D (1) D B1 4 H E 1 2 3 e e1 E(1) e H V 10 max 1. Do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.15mm (0.006inches) Figure 9. Footprint (dimensions in mm) 3.25 1.32 5.16 7.80 1.32 2.30 0.95 5/7 Ordering information Table 6. TO-92 Dimensions DIMENSIONS REF. Millimeters Min. A a B C Z00607 Inches Min. Typ. 0.053 Max. Typ. 1.35 Max. A B C 4.70 2.54 4.40 12.70 3.70 0.50 0.173 0.500 0.100 0.185 F D E D E F a 0.146 0.019 4 Ordering information Base quantity 2500 TO-92 0.2 g 2000 2000 SOT-223 0.12 g 1000 Delivery mode Bulk Ammopack Tape and reel Tape and reel Ordering type Z00607MA 1BA2 Z00607MA 2BL2 Z00607MA 5BL2 Z00607MN 5AA4 Marking Z0607MA Z0607MA Z0607MA Z6M Package Weight 5 Revision history Date Oct-2001 25-Mar-2005 21-Jun-2005 13-Sep-2005 12-Apr-2007 Revision 4 5 6 7 8 Last update. Package: TO-92 tape and reel delivery mode 5BL2 added. Markings updated from Z006xxxx to Z06xxxx Z00607MA 2BL2: marking corrected from 00607mA to Z0607MA Reformatted to current standard. Added SOT-223 package. Changed Tj from +125 to +110 in Table 1 Description of Changes 6/7 Z00607 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 7/7 |
Price & Availability of Z00607MA2BL2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |